|
|
Post by Kevin on Mar 11, 2010 15:53:06 GMT -7
I am trying to replace the springs and struts on the SHO. It would be easier if I could get the old ones out.
|
|
|
|
Post by 4ZZS on Mar 11, 2010 19:20:09 GMT -7
What is it about not coming out that is the problem?
|
|
|
|
Post by deraldrice on Mar 11, 2010 21:05:14 GMT -7
Taurus's have a coil-over strut, right  ? Make sure you use the proper tools and proceedures so that you don't get a spring implanted into your forehead. Also have 911 on your speed dial. Good luck. |
|
|
|
Post by Kevin on Mar 12, 2010 7:06:10 GMT -7
I just can't get the old one out of the pocket on the spindle. It is almost high enough, but not quite.
|
|
|
|
Post by 4ZZS on Mar 12, 2010 8:53:52 GMT -7
Kevin,
I can't picture exactly what you are talking about, but I have some spring compressors if they would help.
Ken
|
|
? Make sure you use the proper tools and proceedures so that you don't get a spring implanted into your forehead. Also have 911 on your speed dial. Good luck.